RAINPOD host a variety of features to help make your water saving escapade a pain free and an enjoyable experience altogether.

RAINPOD is built in the UK & it is made of high quality, heavy duty, high pressure PVCU components

All connecting parts such as the built in tap, winter shut off valve and snap fit base are all fully replaceable should you need to in the future. 

It isn't just RAINPOD that we are proud of, we have a fully stocked shop of quality accessories that will also help to make your life abit easier and run more smoothly.


Unobtrusive, Slim Line Design

With its space saving, slim line design, RAINPOD will blend in seamlessly with your existing pipework & can fit onto almost any property world wide

Dimensions: 800mm (h) x 105mm (w) x 200mm (d). Dimensions include wall brackets & tap.


Direct Connect - 20mm (3/4") & 25mm (1")

RAINPOD will connect to any 20mm (3/4") or 25mm (1") rainwater diverter world wide. 

There are many makes of different rain diverters on the market. However any that have a 3/4" or 1" outlet will connect quickly and easily to RAINPODS inlet. 


Quick Drain

After the rain has fallen and your waterbutts have been topped up, you can access all your water via RAINPODS built in tap.

This tap is also "hose lock" or "snap fit" compatible so you can quickly connect a garden hose.

Premium Tap: All our taps on RAINPOD or bought seperately from our shop are high quality, no leak guaranteed.


"Snap Fit" Base

RAINPOD has been fitted with an updated & new snap fit style base. Ideal for to changing or connecting different types of hoses which can be carried out in seconds.


Multiple Outlets

Using RAINPODS snap fit base, you can connect multiple outlets in seconds.

This a fantastic way if you are looking to connect more than one waterbutt on different sides of your RAINPOD. Simply connect using a "snap fit Y connector.


Winter Shut Off Valve

In severe cold spells where temperatures drop under 0 degrees for more than a few days, we recommend to isolate and drain your RAINPOD. 

Simply close the inlet shut-off valve (or disconnect from diverter (older models), close all connected water butt taps, and disconnect your hose from the base of RAINPOD. 

All the water in the pod will quickly drain out.


Single Water Butt

RAINPOD allows you to connect to single water butt in seconds. 

Simply position your water butt in its preferred spot, out of the way, far from any connecting drainpipe.

For more information on how this type of setup and how to do it, please click here.


Multiple Water Butts

With your RAINPOD now setup, its time to add multiple water butts to maximise your saved rainwater.

The only limiting feature to this setup is your space. If you have enough space & you are serious about saving water, connect as many water butt as you desire.

For more information on how this type of setup and how to do it, please click here.


Daisy Chaining

Daisy chaining is a really easy way to connect as many water butts as possible.

Simply use a "t" connector at the base of each water butt then branch off to your water butt and the next butt in situe.


Rainwater on tap in your garden/greenhouse

This is another exciting feature that RAINPOD has to offer. 

By adding an additional RAINPOD to your water harvesting arsenal, you can now have rainwater where you need it in your garden or perhaps your greenhouse, on tap.

Simply lay down some new hose and connect to one your water butt by using a "t" connector and then connect to your new RAINPOD.